Sma FLX Series Sensor Interface Option Manuel d'utilisateur télécharger pdf (Page 7)

1.2 Removal

To remove the option:

1. Insert a screwdriver at the snap connector on the

side of the option.

2. Apply pressure sideways to release the snap

connector as shown in Illustration 1.4.

3. Lift the option off the option slot.

Illustration 1.4 Removal of Option

1.3 Closure and Verification

1. Close the cover of the inverter installation area.

Ensure that the cover is correctly fastened.

2. Turn on PV and AC connection.

Verify that the option is detected. Refer to

2.1.1 Verification via Display.

Installation

6 L00410607-02_2q / Rev. date: 2014-06-20

1 2 3 4 5 6 7 8 9 10 11 12 ... 50 51

Pas de commentaire

Sma FLX Series Sensor Interface Option Manuel d'utilisateur Page 7